Serving the Aurora area  ·  (331) 336-1471  ·  Open Mon-Sun 7am-7pm
📞 (331) 336-1471 Free Quote

Metal Roofing in Montgomery, IL (60538) · Local Professionals

Aurora Metal Roofing · Fast response in Montgomery and the Aurora area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+143Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Montgomery, Illinois, sits right where the Fox River bends west of Aurora, and the housing stock tells the story: 1920s bungalows near the river, mid-century ranches off Douglas Road, and 1990s subdivisions like Seasons Ridge and Blackberry Crossing with those big shingle roofs that take a beating from hail and snow.

If you live in 60538 and your roof is showing its age, our team at Aurora Metal Roofing is just a short drive away. We know the ice dams that form on low-pitch ranches near the river and the wind-lifted panels that show up after a summer storm rolls through the Fox Valley. We are fully insured and we focus on metal roofing, not a little bit of everything.

Metal Roofing in Montgomery (60538)

Montgomery is flat prairie land with the Fox River cutting through the north end, and that geography matters for roofing. On the river side, homes near Montgomery Park and the Fox River Trail deal with heavy snow loads and freeze-thaw cycles that work fasteners loose and open seams. In the newer subdivisions off U.S. Route 30 and Orchard Road, the lots are tight, the roofs are steep, and the shingle roofs from the 1990s and 2000s are hitting the end of their lifespan. We see a lot of wind damage on the west-facing slopes and ice damming at the eaves on the older bungalows closer to downtown Montgomery.

Our team has worked on everything from small porch roofs to full standing seam replacements on two-story homes in Blackberry Crossing and Seasons Ridge. We know how to navigate the tight access in the older neighborhoods and how to stage materials without tearing up your landscaping. We also serve the surrounding area, including Aurora, Oswego, and Boulder Hill, so if you are just outside 60538, we can still help.

Our services in Montgomery

How a Job Works in Montgomery

Step 1: You call us at (331) 336-1471 or request a free estimate online. We schedule an on-site assessment at a time that works for you, usually within a few days. We inspect your roof, take measurements, and talk through options like standing seam, metal shingle, or a retrofit over your existing shingles. You get a written estimate with clear pricing, no pressure.

Step 2: Once you approve, we pull the permit with the local building department (Montgomery and the surrounding jurisdictions have their own rules, so we verify everything before we start). We order materials, coordinate delivery, and schedule the crew. For homes in tighter neighborhoods, we plan the staging carefully so we do not block driveways or damage lawns. If your home is in an HOA, we help you get the design approval before we order a single panel.

Step 3: When the work is done, we do a full cleanup, including magnet sweeps for nails and a final walkthrough with you. We do not leave until you are satisfied and your property is clean. We also provide documentation for your insurance claim if storm damage is involved, though coverage is always up to your insurer.

Pricing for metal roofing in Montgomery depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam starts at $10 per square foot, and metal roof replacement starts at $9 per square foot. If you want to go over existing shingles, retrofit starts at $7 per square foot. Repairs and leak fixes start at $450, screw replacement and re-fastening starts at $750, and flashing or chimney repair starts at $600. We also offer free estimates for storm damage inspections and commercial projects. Call (331) 336-1471 to get a precise quote for your home.

Do you work on the older bungalows near downtown Montgomery and the river?
Yes, we do. Homes near Montgomery Park and along the Fox River often have steep gables, smaller roof sections, and tight lot access. We have experience with those layouts and know how to handle the ice damming that happens at the eaves when snow sits on a low-pitch roof. We also match metal profiles and colors that fit the older architectural style.
How fast can you respond to storm damage in Montgomery?
We prioritize storm and wind damage calls. If a storm has lifted panels or caused a leak, call us at (331) 336-1471 and we will schedule an inspection as soon as possible, often the same day or next day. We provide free inspections for storm damage and can tarp or secure the roof if needed before permanent repairs.
What does a typical metal roof replacement cost in 60538?
Most full replacements in Montgomery fall between $9 and $14 per square foot depending on the material and roof complexity. A standard ranch might be on the lower end, while a steep two-story with dormers and multiple valleys will be higher. We give you a detailed written estimate after inspecting your roof, so you know exactly what you are paying for.
Do I need a permit for a metal roof in Montgomery?
In most cases, yes. A full replacement or re-roof requires a permit from the local building department, and the requirements vary by jurisdiction. We handle the permit application and inspections for you. If your home is in a historic district or has HOA design rules, we also help with that approval process before we order materials.
My HOA has strict rules about roof color. Can you help with approval?
Absolutely. We work with HOA boards regularly and can provide product samples, color chips, and manufacturer specs for the approval process. We will not order panels until you have written approval, so you are not stuck with a color your association rejects. We also respect property line setbacks and coordinate with neighbors if access is needed.
Are you fully insured for work on my Montgomery home?
Yes. We carry general liability insurance and workers' compensation coverage for every job. You should never let an uninsured crew on your roof, and we make sure our paperwork is in order.
What maintenance does a metal roof need in Montgomery's climate?
Metal roofs are low maintenance, but in our climate you should check fasteners and seals every few years, especially after a harsh winter. Ice dams can loosen screws at the eaves, and summer hail can dent softer panels. We offer inspection and maintenance plans, and we recommend clearing leaves and debris from valleys and gutters each fall to prevent water backup.
Why choose us?

Trusted professionals in Aurora

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Aurora

All your work handled by qualified professionals in Aurora

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

143+ Verified Client Reviews in Aurora

⭐⭐⭐⭐⭐ 4.9/5 · 143 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Aurora · Response within 24h · No commitment · ☎ (331) 336-1471

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Aurora ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm