Serving the Aurora area  ·  (331) 336-1471  ·  Open Mon-Sun 7am-7pm
📞 (331) 336-1471 Free Quote

Metal Roofing in Aurora, IL (60505) · Local Professionals

Aurora Metal Roofing · Fast response in Aurora and the Aurora area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
🎯 Get a Free Quote 📞 (331) 336-1471
+143Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Aurora is a river city with a split personality: Victorian rooftops on the Near East Side and around Stolp Island, low-slung ranches out by Phillips Park, and big subdivision roofs across Fox Valley and Stonebridge. That mix of steep slate-era gables and wide low-pitch shingle fields means one metal roofing plan rarely fits every block.

Homeowners in 60505 call Aurora Metal Roofing because we quote what the roof actually needs, not a one-size package. From the freeze-thaw cycles along the Fox River to the hail that rolls across the prairie edge, we build for this climate and this housing stock.

Metal Roofing in Aurora (60505)

Aurora sits where the Fox River cuts through downtown and flat farmland opens up to the west and south. On the Near East Side and around Stolp Island, steep Victorian and Queen Anne gables mean tall ladders, careful staging, and flashing details around chimneys and dormers that were never designed for modern panels. West Side bungalows and brick Tudors have their own quirks, including low porch roofs and tight side yards. South of Phillips Park, the 1950s and 1960s ranches and split-levels have low-pitch shingle roofs that are good candidates for standing seam or a retrofit over the existing layers, if the deck and code allow. Out in Fox Valley, Eola, Oakhurst, and Stonebridge, the two-story subdivisions have large, simple roof planes that go faster, but HOA rules often control panel profile and color. On the rural edge, barns and pole sheds call for corrugated or R-panel systems that shed snow and handle wind without fuss. The freeze-thaw cycle here is the real enemy: ice dams at the eaves, fasteners that back out, and seams that open after a hard winter. Our crews are fully insured and used to working around oaks, maples, and the lilacs that shade so many Aurora lots.

We have installed, repaired, and replaced metal roofs across Aurora and the surrounding Kane County area, from historic districts to new construction. We know which suppliers stock the profiles that pass local review and which colors hold up under our gray winter light and humid summers.

Our services in Aurora

How a Job Works in Aurora

Step 1: Call us at (331) 336-1471 or request a free on-site assessment. We walk the roof, check the deck, flashing, and fasteners, and talk through whether a repair, a retrofit over shingles, or a full replacement makes sense. You get a written estimate with material options and a clear scope before anything starts.

Step 2: Once you approve, we pull the required roofing permit through the local building department and schedule around weather. On tight Near East Side lots we plan material drops and staging carefully so we are not blocking alleys or neighbors. In HOA subdivisions we coordinate color and profile approvals before the order goes in. Crews are fully insured and keep the site secure each night.

Step 3: We clean up daily, magnet-sweep for nails, and do a final walkthrough with you. We leave your property clean and show you what was done, including any maintenance notes for the seasons ahead.

Pricing in Aurora depends on roof size, pitch, access, deck condition, and how fast you need it done. As a ballpark, metal roof installation starts around $8 per square foot, standing seam around $10, metal roof replacement around $9, and a retrofit over existing shingles around $7. Repairs and leak calls start around $450, screw replacement and re-fastening around $750, and flashing or chimney work around $600. Stone-coated steel and metal shingle run near $9 per square foot, while copper and specialty metals start around $20. Storm and wind damage inspections are free, and we document what we find for your insurance claim. Call (331) 336-1471 for a free estimate specific to your Aurora property.

My Victorian on the Near East Side has a steep gable and an old chimney. Can you match metal to that roof without it looking out of place?
Yes. On steep Victorian and Queen Anne roofs we often use standing seam or a metal shingle profile that reads like slate, with custom flashing around the chimney and dormers. We measure the gable and pitch first, then recommend a panel width and color that fits the house instead of fighting it.
A storm just peeled back panels on my roof in Fox Valley. How fast can you get out?
Call (331) 336-1471 and we will schedule a free storm and wind damage inspection, usually within a day or two depending on volume. We tarp or secure active leaks first, then document the damage for your insurance claim and give you a repair or replacement estimate.
What does a typical metal roof replacement cost in Aurora, and what moves the price?
Most full replacements start around $9 per square foot, with standing seam closer to $10 and retrofits over shingles around $7. Size, pitch, number of penetrations, deck repairs, and access all change the number. A steep Victorian with a tight side yard costs more to stage than a simple ranch roof.
Do I need a permit for a metal roof in Aurora, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof, and thresholds and inspection requirements vary by jurisdiction. We verify the rules with the local building department before work starts. You can also check the City of Aurora website at https://www.aurora-il.org for general information, but always confirm current requirements with the building department.
My HOA wants a specific panel profile and color. Can you work with that?
We handle HOA design review regularly in Stonebridge, Oakhurst, and other Aurora subdivisions. Send us the architectural rules and we will recommend panels and colors that meet them, then coordinate the approval before ordering materials. We also respect property line setbacks and keep staging on your side of the lot.
Are you insured for work on my Aurora property?
Yes. Aurora Metal Roofing is fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Aurora's freeze-thaw winters?
Check fasteners and seams each fall, clear debris from valleys and gutters, and watch for ice dams at the eaves after heavy snow. Snow guards help on steep roofs over walkways. We offer inspections and tune-ups so small issues do not become spring leaks.

Nearby service areas

📍 Montgomery 60538📍 North Aurora 60542📍 Oswego 60543📍 Batavia 60510
Why choose us?

Trusted professionals in Aurora

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Aurora

All your work handled by qualified professionals in Aurora

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

143+ Verified Client Reviews in Aurora

⭐⭐⭐⭐⭐ 4.9/5 · 143 verified Google reviews

David L.
⭐⭐⭐⭐⭐
DL
David L.
Sugar Grove

“We had a detached garage built on our rural property and needed a metal roof to match the barn. Aurora Metal Roofing handled the standing seam install on the whole 30x40 structure in two days and left the site spotless. Couldn't be happier with how it turned out.”

Metal Roof Installation
Scott H.
⭐⭐⭐⭐⭐
SH
Scott H.
North Aurora

“Water was sneaking in around the brick entry porch and we couldn't figure out where. Turns out the flashing where the metal roof met the brickwork was shot. They redid it properly and we haven't seen a drop since. Fair price too.”

Flashing & Chimney Repair
James P.
⭐⭐⭐⭐⭐
JP
James P.
Montgomery

“Our old barn roof was rusting through and we needed it done before hay season. Crew of four knocked out the whole red corrugated panel replacement in three days flat. Looks sharp and the price beat the two other quotes we got.”

Agricultural Metal Roofing
Karen T.
⭐⭐⭐⭐
KT
Karen T.
Oswego

“They replaced our residential metal roof in the middle of January, which I figured would be a nightmare. The crew worked around the cold snaps and still finished on schedule. Only gripe is they left a few stray screws in the driveway I found with my tire.”

Metal Roof Replacement
Kevin R.
⭐⭐⭐⭐⭐
KR
Kevin R.
Batavia

“Had a persistent leak around our furnace vent pipe for two winters. Aurora Metal Roofing actually diagnosed the seal issue instead of just slapping caulk on it. Fixed the flashing and sealed it right. Relieved doesn't even cover it.”

Metal Roof Leak Repair
Jennifer M.
⭐⭐⭐⭐⭐
JM
Jennifer M.
Naperville

“New construction on our house and we went with a standing seam roof. The installers were meticulous with the panel alignment and the ridge caps look perfect. Walked the whole roof with me at the end to show their work.”

Standing Seam Metal Roofing
Sarah W.
⭐⭐⭐⭐⭐
SW
Sarah W.
Warrenville

“Called them out mid-February after some ice damming worried me. They did a full inspection, found a couple of loose fasteners and reseated them, and recommended snow guards for next season. Honest folks, no upsell pressure.”

Metal Roof Inspection
Rachel S.
⭐⭐⭐⭐⭐
RS
Rachel S.
Aurora

“We did a retrofit over our old shingles instead of a full tear-off and I was skeptical. Shouldn't have been. The crew of three had the metal panels on our 1,800 sq ft ranch done in four days and cleaned up so well you couldn't tell anyone had been there.”

Metal Roof Over Shingles (Retrofit)
Free Quote

Get Your Free Quote

Metal Roofing in Aurora · Response within 24h · No commitment · ☎ (331) 336-1471

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Aurora ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm