Serving the Aurora area  ·  (331) 336-1471  ·  Open Mon-Sun 7am-7pm
📞 (331) 336-1471 Free Quote

Metal Roofing in Lombard, IL (60148) · Local Professionals

Aurora Metal Roofing · Fast response in Lombard and the Aurora area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+143Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Lombard is a village of tree-lined streets, older brick storefronts, and a housing mix that runs from 1920s bungalows near the Metra tracks to 1990s subdivisions out toward Highland Avenue. The lots are tight, the oaks are tall, and the roofs take a beating from hail, wind, and winter ice.

Homeowners in 60148 call Aurora Metal Roofing because we know the difference between a quick patch on a low-slope porch roof and a full standing seam replacement on a steep Victorian gable. We are based in Aurora, serve Lombard and the surrounding area, and we show up when we say we will.

Metal Roofing in Lombard (60148)

Lombard has its own set of roof challenges. The village’s older core near the Metra station and St. Charles Road has narrow lots with mature trees that drop limbs and fill gutters, and many of those homes have steep, complex rooflines with dormers and valleys that need careful flashing. Out toward Route 53 and the Great Western Trail, the 1960s and 70s ranches and split-levels often have low-slope sections where ice dams form at the eaves. Newer subdivisions near Madison Meadow and the Lombard Common have larger, simpler roofs but tighter side yards, so staging materials takes planning. We have worked on everything from small porch roofs to long-span agricultural panels on the edge of town, and we know how to protect landscaping and siding while we work.

Our team has been serving Lombard and the Aurora area for years, and we understand the local building department’s permit process and inspection requirements. We are fully insured with general liability and workers’ compensation, and we treat every property like it is our own.

Our services in Lombard

How a Job Works in Lombard

Step 1: You call (331) 336-1471 or fill out our contact form, and we schedule a free on-site assessment at your Lombard property. We inspect the roof, take photos, and talk through options and budget. You get a written estimate, usually within a day or two.

Step 2: Once you approve, we pull the required permits from the Village of Lombard and schedule the work. On installation day, we protect your landscaping with tarps, stage materials in your driveway or on the street as allowed, and keep the job site tidy. For older homes with tight lot access, we plan ahead so deliveries do not block neighbors. We also coordinate with HOA design review if your subdivision requires it.

Step 3: When the work is done, we walk the roof with you, clean up every nail and scrap, and make sure you are satisfied before we leave. We do not consider a job finished until your property is clean and you have the documentation you need for your records or insurance.

Pricing in Lombard depends on the size and pitch of your roof, the material you choose, and how much prep work is needed. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and metal roof over shingles (retrofit) at $7. Corrugated and ribbed panel roofing starts at $5.50, metal shingle and stone-coated steel at $9, and copper or specialty metal at $20. Repairs start at $450, leak repair at $450, screw replacement and re-fastening at $750, and flashing, chimney, or skylight repair at $600. Snow guards and ice protection start at $1,200, and gutters for metal roofs start at $9 per linear foot. We offer free estimates and free inspections for storm and wind damage. Call (331) 336-1471 to schedule yours.

My 1920s bungalow near the Metra tracks has a steep roof with dormers. Can you install standing seam without tearing off the old shingles?
Yes, in many cases we can install a metal roof over your existing shingles if the structure and local code allow it. We will inspect the decking and underlayment first. For older homes with complex rooflines, we often recommend a full tear-off to check for hidden rot, but we will give you both options and explain the pros and cons.
A storm just blew through Lombard and lifted some panels on my roof. How fast can you get out for an emergency repair?
We prioritize storm damage calls in Lombard and the surrounding area. Call (331) 336-1471 and we will schedule an inspection as soon as possible, often within 24 to 48 hours depending on demand. We can tarp or secure the roof to prevent further damage and provide a written estimate for permanent repairs.
What does a typical metal roof replacement cost for a 1,500-square-foot ranch in Lombard?
For a 1,500-square-foot ranch with a simple roofline, a metal roof replacement typically ranges from $9 to $14 per square foot installed, depending on the panel type and whether we tear off the old roof. That puts a ballpark project in the $13,500 to $21,000 range. Access, pitch, and the condition of the decking can affect the final price. We provide a free estimate so you know exactly what to expect.
Do I need a permit from the Village of Lombard to replace my roof?
Yes, the Village of Lombard generally requires a permit for a full roof replacement or re-roof. Requirements and fees can vary, so we always confirm with the village building department before starting work. We handle the permit application and schedule the required inspections so you do not have to worry about it.
My neighbor’s tree hangs over my property line. Can I trim branches to install my new metal roof, and does my HOA need to approve the color?
In Illinois, you generally have the right to trim branches that overhang your property line, but you should check with your neighbor first and avoid damaging the tree. For HOA approval, many subdivisions in Lombard have design review committees that must approve roof color and material. We can provide product samples and documentation to help with the approval process.
Are you fully insured for work on my Lombard property?
Yes, Aurora Metal Roofing is fully insured with general liability and workers’ compensation coverage. You can feel confident that your property and our crew are protected.
What should I do to prevent ice dams on my metal roof in Lombard this winter?
Ice dams form when heat escapes through the roof and melts snow, which refreezes at the eaves. Make sure your attic is properly insulated and ventilated, and keep gutters clear of leaves. For metal roofs, we often recommend adding snow guards and ice protection to prevent large sheets of snow from sliding off and to reduce ice buildup. We can inspect your roof and suggest the right solutions for your home.
Why choose us?

Trusted professionals in Aurora

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Aurora

All your work handled by qualified professionals in Aurora

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

143+ Verified Client Reviews in Aurora

⭐⭐⭐⭐⭐ 4.9/5 · 143 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Aurora · Response within 24h · No commitment · ☎ (331) 336-1471

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Aurora ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm