Serving the Aurora area  ·  (331) 336-1471  ·  Open Mon-Sun 7am-7pm
📞 (331) 336-1471 Free Quote

Metal Roofing in Bolingbrook, IL (60440) · Local Professionals

Aurora Metal Roofing · Fast response in Bolingbrook and the Aurora area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+143Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Bolingbrook is a town of big shingle roofs, and a lot of them are hitting the end of their service life right about now. The 1970s through 2000s subdivisions off Boughton Road and Weber Road, from Indian Oaks to Brookwood, are full of two-story homes with wide, low-slope roof planes that were shingled when the subdivisions were new. Those roofs are now 25 to 45 years old, and between the ice dams of our winters and the hail that rolls through in spring, many are due for replacement or a metal retrofit.

We are Aurora Metal Roofing, and we serve Bolingbrook and the surrounding suburbs from our base in Aurora. We know the housing stock here, we know what the local building department expects, and we are fully insured with general liability and workers' compensation. If you are near the Bolingbrook Golf Club or over by the Promenade, we have probably worked on a roof like yours.

Metal Roofing in Bolingbrook (60440)

Most Bolingbrook roofs sit on flat to gently sloping lots in planned subdivisions, which sounds easy until you deal with the details. The older sections, like Indian Oaks and the streets around Bolingbrook High School, have mature trees that drop leaves and limbs on low-pitch roofs, and that debris traps moisture at the eaves. The newer subdivisions off 111th Street and Weber Road often have tighter side yards and HOA rules about panel profiles and colors. We measure access, check the decking, and look at how the roof drains before we quote anything, because a metal roof over shingles only works when the existing roof is sound and the local code allows the extra layer.

Our team has installed, repaired, and replaced metal roofs across Bolingbrook and the Aurora area for years. We have worked on ranches, two-story colonials, and commercial buildings along the I-355 corridor, and we bring that experience to every estimate.

Our services in Bolingbrook

How a Job Works in Bolingbrook

Step 1 is a free on-site assessment. We come out, get on the roof if it is safe, check the shingles, flashing, and decking, and talk through your options: a full metal roof replacement, a metal roof over shingles retrofit if your roof qualifies, or a targeted repair. We give you a written estimate with the price per square foot and the total, no surprises.

Step 2 is the work itself. In Bolingbrook, that often means coordinating with your HOA on panel color and profile before we order materials, and pulling the roofing permit from the city. We protect landscaping, stage materials in the driveway, and keep the crew moving so your roof is watertight as quickly as possible.

Step 3 is cleanup and a final walkthrough. We magnet-sweep for nails, haul away old materials, and walk the roof and gutters with you so you know exactly what was done and how to care for it.

Pricing in Bolingbrook depends on the size and pitch of your roof, the condition of the decking, how many layers of shingles are already there, and how quickly you need it done. As a ballpark, metal roof installation starts around $8 per square foot, standing seam starts around $10, metal roof replacement starts around $9, and a metal roof over shingles retrofit starts around $7. Repairs and leak fixes start around $450, screw replacement and re-fastening around $750, and flashing or chimney work around $600. Every roof is different, so call us at (331) 336-1471 for a free estimate and a real number for your home.

My house is in Indian Oaks and the roof is original from the 1970s. Can you put metal over the existing shingles?
Possibly, but it depends on how many layers are already there and what the Bolingbrook building department allows. Many homes in Indian Oaks have one layer of original shingles, which can qualify for a retrofit, but we need to inspect the decking and flashing first. If the shingles are curling or the deck is soft, a full tear-off and replacement is the better call.
A storm just took shingles off my roof near Bolingbrook High School. How fast can you get out?
We prioritize storm and wind damage calls, especially when there is active leaking. Call us at (331) 336-1471, and we will schedule an inspection as quickly as we can, often the same day or next. We can tarp an active leak, document the damage for your insurance claim, and give you a repair or replacement estimate.
What does a typical metal roof cost for a two-story house in the 60440 ZIP code?
Most two-story homes in Bolingbrook run between 1,800 and 3,000 square feet of roof area. At our starting prices, a metal roof over shingles retrofit could start around $12,600 to $21,000, and a full replacement with standing seam could run higher. The exact number depends on pitch, access, and whether any decking needs repair. We give free written estimates.
Do I need a permit from the City of Bolingbrook for a metal roof?
Yes, a full replacement or re-roof typically requires a roofing permit from the City of Bolingbrook Building Department, and the rules on how many layers you can recover over vary. We handle the permit application and inspection coordination for you, and we confirm the current requirements with the city before work starts.
My HOA in Brookwood has design rules. Can you help with approval for a metal roof?
We can. Many Bolingbrook HOAs restrict panel profile and color, so we provide product samples, spec sheets, and color options you can submit to your architectural review committee. We will not order materials until you have written HOA approval, and we can adjust the panel style to match what your association allows.
Are you fully insured for work on my Bolingbrook property?
Yes. We carry general liability insurance and workers' compensation coverage for our crews.
What maintenance does a metal roof need in Bolingbrook's climate?
Metal roofs are low maintenance, but our freeze-thaw winters and summer storms mean you should check fasteners and seals once a year, keep gutters clear of leaves from the mature trees, and watch for ice dams at the eaves. We offer inspections and can re-fasten or replace screws before a small issue becomes a leak.
Why choose us?

Trusted professionals in Aurora

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Aurora

All your work handled by qualified professionals in Aurora

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

143+ Verified Client Reviews in Aurora

⭐⭐⭐⭐⭐ 4.9/5 · 143 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Aurora · Response within 24h · No commitment · ☎ (331) 336-1471

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Aurora ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm