Licensed & Insured, in Aurora and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Aurora
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (331) 336-1471 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Aurora and surrounding areas · On-site visits included · Free estimate within 24h
Aurora Metal Roofing is a team of local certified professionals based in Aurora. We respond quickly in Aurora and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (331) 336-1471⭐⭐⭐⭐⭐ 4.9/5 · 143 verified Google reviews
“We had a detached garage built on our rural property and needed a metal roof to match the barn. Aurora Metal Roofing handled the standing seam install on the whole 30x40 structure in two days and left the site spotless. Couldn't be happier with how it turned out.”
Metal Roof Installation
“Water was sneaking in around the brick entry porch and we couldn't figure out where. Turns out the flashing where the metal roof met the brickwork was shot. They redid it properly and we haven't seen a drop since. Fair price too.”
Flashing & Chimney Repair
“Our old barn roof was rusting through and we needed it done before hay season. Crew of four knocked out the whole red corrugated panel replacement in three days flat. Looks sharp and the price beat the two other quotes we got.”
Agricultural Metal Roofing
“They replaced our residential metal roof in the middle of January, which I figured would be a nightmare. The crew worked around the cold snaps and still finished on schedule. Only gripe is they left a few stray screws in the driveway I found with my tire.”
Metal Roof Replacement
“Had a persistent leak around our furnace vent pipe for two winters. Aurora Metal Roofing actually diagnosed the seal issue instead of just slapping caulk on it. Fixed the flashing and sealed it right. Relieved doesn't even cover it.”
Metal Roof Leak Repair
“New construction on our house and we went with a standing seam roof. The installers were meticulous with the panel alignment and the ridge caps look perfect. Walked the whole roof with me at the end to show their work.”
Standing Seam Metal Roofing
“Called them out mid-February after some ice damming worried me. They did a full inspection, found a couple of loose fasteners and reseated them, and recommended snow guards for next season. Honest folks, no upsell pressure.”
Metal Roof Inspection
“We did a retrofit over our old shingles instead of a full tear-off and I was skeptical. Shouldn't have been. The crew of three had the metal panels on our 1,800 sq ft ranch done in four days and cleaned up so well you couldn't tell anyone had been there.”
Metal Roof Over Shingles (Retrofit)Real photos of our work in Aurora · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener R-panel installation | Starting at $8/sq ft | Includes underlayment, fasteners, and trim; price rises with pitch, tear-off layers, and deck repairs. |
| Standing seam installation | Starting at $12/sq ft | Concealed clips and raised seams; steep gables and complex valleys push the per-square rate higher. |
| Stone-coated steel or metal shingle installation | Starting at $11/sq ft | Textured panels for HOA and historic roofs; dormers and multiple planes add labor and flashing time. |
| Complex or large-scale job | On estimate | Multi-plane roofs, copper accents, and structural repairs need an on-site look before we quote. |
| Travel | Included | In Aurora and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (331) 336-1471, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam, simple gable roof | Starting at $10/sq ft | Includes tear-off, underlayment, panels, and standard flashing on an accessible single-story roof. |
| Standing seam, cut-up or steep roof | Starting at $14/sq ft | Dormers, turrets, valleys, and steep pitches add labor, staging, and waste on Victorian-era homes. |
| Standing seam over existing deck with repairs | On estimate | Soft sheathing, fascia rot, or prior leak damage must be opened and inspected before a number is firm. |
| Complex or large-scale job | On estimate | Multi-plane roofs, historic district review, or HOA approval need an on-site look before pricing. |
| Travel | Included | In Aurora and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (331) 336-1471, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed fastener panel replacement | Starting at $9/sq ft | Includes tear-off, deck inspection, underlayment and new corrugated or ribbed panels with screws. |
| Standing seam replacement | Starting at $14/sq ft | Concealed fasteners, raised seams and full flashing; pitch and roof complexity move the price. |
| Metal shingle or stone-coated steel | Starting at $12/sq ft | Period-look panels over new underlayment; steep gables and multiple penetrations add labor. |
| Complex or large-scale job | On estimate | Steep Victorian pitches, heavy deck rot or tight lots need an on-site look before pricing. |
| Travel | Included | In Aurora and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (331) 336-1471, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener retrofit (corrugated or ribbed panel) | Starting at $7/sq ft | Includes panels, fasteners, slip sheet, and standard flashing over one sound shingle layer |
| Standing seam retrofit on purlins | Starting at $11/sq ft | Concealed fasteners, purlin system, and premium trim; price rises with roof pitch and complexity |
| Stone-coated steel or metal shingle retrofit | Starting at $12/sq ft | Mimics slate or shake for HOA and historic review; panel profile drives the rate |
| Deck repair and ice-dam remediation | On estimate | Soft decking, rotted sheathing, or chimney moisture found during inspection must be priced on site |
| Travel | Included | In Aurora and surrounding Fox Valley towns, no separate call-out or mileage fee |
| Estimate | Free | On-site roof and deck inspection, response within 24h at (331) 336-1471, no obligation |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor repair (boots, screws, sealant) | Starting at $450 | Covers small leaks at pipe boots, vents, and loose fasteners, with access driving the final price. |
| Panel or flashing repair | Starting at $850 | Replaces a damaged panel or rebuilds failed flashing, priced by roof pitch and access. |
| Storm and hail damage repair | Starting at $1,200 | Multiple panel replacements and fastener service after a storm, documented with photos for insurance. |
| Complex or steep-access repair | On estimate | Steep Victorian gables or jobs needing a lift require an on-site look before a number is given. |
| Travel | Included | In Aurora and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (331) 336-1471, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single-point leak repair | Starting at $450 | Covers diagnosis, fastener or flashing repair, and a re-test of the repair area. |
| Flashing rebuild (chimney or skylight) | Starting at $650 | Removes failed flashing and rebuilds the transition, priced by access and material. |
| Multiple leak points or seam repair | Starting at $900 | For several active leaks or a separated standing seam panel requiring re-crimping. |
| Emergency tarping after storm or thaw | Starting at $350 | Secures the roof until a permanent repair can be scheduled, billed separately. |
| Complex or large-scale leak job | On estimate | Widespread fastener failure or soaked decking needs an on-site look before pricing. |
| Estimate | Free | Response within 24 hours at (331) 336-1471, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Spot re-fastening (small area) | Starting at $750 | Covers a typical residential slope with moderate failed fasteners, new washers, and a hose leak test. |
| Full-slope re-fastening | From $1,200 | Replaces every fastener on one slope, including tight ones, plus new washers and closures. |
| Barn or large agricultural roof | On estimate | Hundreds of fasteners, high access, and possible purlin repair need an on-site look before pricing. |
| Oversized screw and washer upgrade | From $900 | Steps up to larger-diameter screws with EPDM washers for elongated holes and high-wind exposure. |
| Travel | Included | In Aurora and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (331) 336-1471, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof, shed or garage | Starting at $5.50/sq ft | 29-gauge corrugated panels, screws, closures, and basic trim included; tear-off and rot repair add cost |
| R-panel (ribbed) roof, barn or workshop | Starting at $6.75/sq ft | 26-gauge R-panel with ridge, eave, and gable trim; wider purlin spacing and height move the rate |
| Tear-off and disposal of old panels or shingles | Starting at $1.25/sq ft | Removal, haul-off, and dump fees; number of old layers and site access change the figure |
| Purlins, framing, and deck repair | On estimate | Rotten purlins, sagging framing, or soft decking need an on-site look before we quote a number |
| Travel | Included | In Aurora and surrounding Kane County towns, no separate call-out or mileage fee |
| Estimate | Free | Response within 24 hours at (331) 336-1471, no obligation to book the job |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stamped steel shingle, standard roof | Starting at $9/sq ft | Includes tear-off, underlayment, flashing and standard trim on a walkable pitch. |
| Stone-coated steel shingle | Starting at $11/sq ft | Includes stone-granule finish and matching trim, priced higher for the textured look. |
| Steep or complex roof | On estimate | Pitch, dormers and valley count drive the labor, so we measure before quoting. |
| Retrofit over existing shingles | On estimate | Code limits the number of existing layers, so we inspect the deck first. |
| Travel | Included | In Aurora and surrounding Kane County towns, with no separate call-out fee. |
| Estimate | Free | Response within 24 hours at (331) 336-1471, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel roof installation (full tear-off) | Starting at $9/sq ft | Includes tear-off, underlayment, panels, flashing, ridge caps, and cleanup; complexity and pitch move the price. |
| Retrofit over existing shingles | Starting at $7.50/sq ft | Installed over a prepared existing roof where code allows; number of existing layers affects cost. |
| Stone-coated steel roof repair | Starting at $450 | Covers panel replacement, flashing repair, and fastener work; damage extent and access drive the final number. |
| Complex or large-scale job | On estimate | Steep, cut-up roofs with multiple valleys, dormers, and chimneys need an on-site look before pricing. |
| Travel | Included | In Aurora and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (331) 336-1471, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper flat seam and accent work | Starting at $20/sq ft | Includes formed copper pans and soldered seams for bay windows, porch roofs, and dormers. |
| Copper standing seam roof | Starting at $28/sq ft | Concealed-fastener panels formed to pitch, with underlayment and trim included. |
| Zinc and aluminum specialty roofing | Starting at $18/sq ft | Includes matte zinc or lightweight aluminum panels, trim, and concealed fastening. |
| Custom fabrication and curved details | On estimate | Turrets, curved porches, and non-standard details need an on-site measure before pricing. |
| Travel | Included | In Aurora and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (331) 336-1471, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic prep and coat | Starting at $2.50/sq ft | Pressure wash, rust spot treatment and one finish coat on sound panel roofs with simple access. |
| Full restoration system | Starting at $4.50/sq ft | Prep, fastener replacement, rust converter, primer and two finish coats on faded or rusting roofs. |
| Exposed-fastener barn or garage | Starting at $2.75/sq ft | Elastomeric coating sized for corrugated and R-panel roofs, priced by square footage and rust severity. |
| Copper patina treatment | On estimate | Cleaning and stabilizing copper oxidation on bay windows, cupolas and porch roofs needs an on-site look. |
| Travel | Included | In Aurora and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (331) 336-1471, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single chimney re-flash | Starting at $600 | Covers new step and counterflashing on an accessible chimney with no rot or panel removal. |
| Skylight curb re-flash | Starting at $750 | Includes curb inspection, new flashing, and water test on a standard pitched roof. |
| Valley or sidewall metal replacement | Starting at $900 | Price moves with linear footage, pitch, and whether panels must be lifted to reach the transition. |
| Copper or specialty flashing | On estimate | Historic and custom copper details need an on-site look before we can quote material and fabrication. |
| Emergency leak containment | Starting at $350 | Temporary water stop and inspection, credited toward the permanent repair if booked within 30 days. |
| Estimate | Free | Response within 24h at (331) 336-1471, no obligation to book the repair. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Entry and walkway guard install | Starting at $1,200 | Pad or bar guards over main entries and walks, sized to panel profile and pitch. |
| Full roof guard system | Starting at $2,800 | Guard rows across multiple slopes and lower roofs, priced by linear footage and access. |
| Ice dam detailing at eaves and valleys | On estimate | Scope depends on roof pitch, valley layout and whether underlayment work is needed. |
| Guard removal and re-set during re-roof | On estimate | Priced with the replacement job once panel count and guard reuse are confirmed. |
| Travel | Included | In Aurora and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (331) 336-1471, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof and fastener inspection, photo documentation, and written damage report for insurance. |
| Minor repair (fasteners, sealant, flashing) | Starting at $350 | Replacing screws and washers, re-sealing seams, and rebuilding small flashing details. |
| Panel replacement (isolated damage) | Starting at $850 | Cutting out and matching damaged panels; price moves with panel profile, pitch and access. |
| Large or complex storm repair | On estimate | Multiple panel runs, steep gables or hidden deck damage need an on-site look before pricing. |
| Travel | Included | In Aurora and surrounding Kane County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (331) 336-1471, with no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Free estimate visit | Free | Initial on-site assessment and verbal findings, no obligation and no call-out charge in Aurora |
| Standard written inspection | Starting at $149 | Photo report, fastener check and seam review for a typical single-family gable roof |
| Full probe and storm documentation | Starting at $299 | Water testing, measured hail documentation and insurance-ready report for larger or older roofs |
| Complex or steep-pitch roof | On estimate | Multi-valley Victorian, barn or steep-pitch roofs need an on-site look before pricing |
| Travel | Included | In Aurora and surrounding Kane County towns, no separate mileage or call-out fee |
| Estimate | Free | Response within 24 hours at (331) 336-1471, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless gutter, standard run | Starting at $9/linear ft | On-site formed gutter in a common color, standard fascia brackets, and basic downspout included. |
| Seam-clamp system for standing seam | Starting at $14/linear ft | Non-penetrating clamps, heavy-duty hangers on tight centers, priced by roof height and pitch. |
| 6-inch oversized system with 3x4 downspouts | Starting at $16/linear ft | Larger trough and downspouts for big subdivision roofs, priced by run length and outlet count. |
| Copper and specialty metal gutters | On estimate | Material cost and custom profiles require an on-site look before a number is given. |
| Fascia and rafter-tail repair | On estimate | Carpentry scope varies by rot extent and access, so it needs a site visit to price. |
| Estimate | Free | Response within 24h at (331) 336-1471, no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Roof inspection and written scope | Free estimate | On-site assessment of panels, fasteners, flashing and purlins, with a written repair or replacement scope |
| Screw replacement and re-fastening | Starting at $450 | Renewing failed fasteners and washers on an exposed-fastener roof, priced by roof size and access |
| Exposed-fastener panel re-roof (barn or shed) | Starting at $3.50 per sq ft | New ribbed steel over sound purlins, including closures and trim, priced by gauge and height |
| Standing seam or insulated commercial system | On estimate | Concealed-fastener or insulated panels need an on-site look for span, slope and rooftop equipment |
| Travel | Included | In Aurora and surrounding Kane County towns, with no separate call-out or mileage fee |
| Estimate | Free | Response within 24 hours at (331) 336-1471, with no obligation to book the work |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Aurora want a crew that understands this city's mix of steep Victorian gables, low-slope ranch roofs, and rural outbuildings, not a call center reading from a script. Aurora Metal Roofing is built for exactly that: a network of licensed, insured local contractors who handle metal roof installation, replacement, re-roofs, and repairs on homes from the Near East Side to the Fox Valley subdivisions. We work on steep pitches, roofs shaded by mature oaks and maples, and the large stock of aging screw-down roofs whose fasteners are due for service.
Our crews serve Aurora, Montgomery, North Aurora, Oswego, and Batavia, and we give straight guidance on repair versus replace and standing seam versus exposed fastener before anyone touches your roof. If you want a clear scope and an honest recommendation, start with a free estimate.
Most metal roof leaks in Aurora trace back to a short list of failures, and the number one cause on 15 to 30 year old exposed-fastener roofs is fasteners backing out as their EPDM sealing washers dry, shrink, and crack. Once the washer loses its seal, water works past the screw head. Seam separation from thermal movement opens panels slightly wider each freeze-thaw cycle. Failed pipe boots and flashing at chimneys, skylights, and valleys let water in at the most vulnerable transitions. Wind-lifted panels after a straight-line gust or hail event, and punctures from fallen limbs, finish the list.
Ignoring these failures is expensive. Water tracks along purlins and decking far from the entry point, so a stain on the ceiling may sit many feet from the actual gap. Rotted sheathing and saturated insulation follow, and repair costs climb with every season you wait. This is why we inspect the whole assembly, not just the spot where the drip appears.
The honest call between repair and replacement depends on panel condition, decking, and how many fasteners have already failed. On many roofs, a full screw replacement with new sealing washers restores a watertight roof for a fraction of replacement cost, and we will tell you plainly when that is the right answer. For active leaks, call (331) 336-1471 to schedule metal roof leak repair, or request a free estimate for a full inspection.
We install the full range of metal systems and match the system to the home. Standing Seam Metal Roofing uses concealed clips and no exposed screws, which makes it the premium choice for remodels and porches. Corrugated & Ribbed Panel Roofing is the economical workhorse for garages, barns, and workshops. Metal Shingle Roofing and Stone-Coated Steel Roofing mimic slate or shake on Victorian and Tudor homes, while Copper & Specialty Metal Roofing handles bay windows and cupolas.
The honest comparison is simple: standing seam costs more up front and has no exposed screws to maintain, while screw-down costs less and needs its fasteners serviced over its life. Metal Roof Over Shingles (Retrofit) is a legitimate option when the deck is sound, and tear-off is the right call when it is not.
Metal roof projects are typically quoted per square foot, while repairs are often flat-rate. Price depends on the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access. We frame every figure as a typical range only, and final pricing depends on the roof and site conditions after inspection.
Some carriers may offer premium discounts for metal or impact-rated roofs, but that is between you and your insurer. For a realistic range on your home, see our pricing page and request a free estimate or free roof inspection.
After a storm, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. We never suggest a deductible could be waived, absorbed, or paid by the contractor.
On permits: in most jurisdictions a permit is commonly required for a full replacement, but requirements vary by city, and fees and inspection requirements differ. Historic district or HOA design review can also restrict panel profile and color. Requirements vary, so always verify with the Aurora building or planning department before starting your project. For documentation and next steps, contact us.
Ready to get started? Aurora Metal Roofing serves in Aurora and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Aurora · Response within 24h · No commitment · ☎ (331) 336-1471
Your Free Quote Request